＜General release liner＞
The most basic and common composition: coated silicone on eithe r single or both sides of various substrate materials. The most basic and common composition: coated silicone on either single or both sides of various substrate materials. Apart from the listed specs, we also offer R&D collaboration for customized specs to suit your needs.
【Products list】
| Brand | Attribute | Peel strength No.31B method] （mN/50mm） |
Peel strength ［No.502 method］ （mN/50mm） |
Subsequent adhesion（％） |
Properties |
|---|---|---|---|---|---|
| C01 | High anchorage | 55 | 90 | 90 | |
| C1 | 80 | 120 | 95 | ||
| CA0 | Easy to medium release |
70 | 210 | 90 | |
| CA1 | 110 | 290 | 90 | ||
| CA2 | 190 | 490 | 90 | ||
| CB3 | Medium to tight release |
200 | 460 | 95 | |
| CB4 | 390 | 650 | 90 | ||
| CB5 | 560 | 690 | 90 | ||
| C3 | 950 | 960 | 85 | ||
| BK0A | Anti-atmospheric corrosion |
60 | 100 | 95 | |
| BK1 | 110 | 160 | 95 | ||
| BK2 | 150 | 240 | 95 | ||
| BK3 | 220 | 400 | 95 | ||
| BK4 | 340 | 650 | 95 | ||
| BK5 | 470 | 1070 | 95 |
[ Peel strength measuring method ]
Nitto tape No.31B 0.3m/min 180 degrees peel. Peel strength after left at room temperature for 2 hours (tape peel).
Nitto tape No.502 0.3m/min 180 degrees peel. after left at temperature of 50 degrees C with loading of 20g/cm2 for 20hours.
* The values in the table are not guaranteed values but representative values.
* Properties are in preparation. Please wait for a while.
